How do I install the Attachment System?

The FFORA Attachment System is a clamp and open dock that attaches to lower tubes of most manual wheelchairs. It's the building block to the full FFORA product range.

Here's a video that demonstrates the installation process:

Inside your box, you should have the following items:

• FFORA Attachment System
• FFORA Keyring
• A pair of silicone inserts

To install the product you should do the following:

1. Use the FFORA Keyring to unscrew the screw to open the clamp.
2. Once the clamp is open, place the pair of silicone inserts so that they line the interior of the clamp; this protects your chair from scratches, but also holds the clamp in place.
3. Set the clamp around the tube in its desired orientation ensuring the silicone inserts are between the clamp and tube.
4. Place the dock into it's desired angle and orientation. It swivels on a 360 degree axis.
5. Firmly tighten the screw using the FFORA keyring. 

Ta-Dah! You're done! 

Please note: Installation could take a few minutes. Getting the angle right may take some trial and error. Ensure that the dock positioned vertically so that it can appropriately hold your belongings. 

If you are still having difficulties please feel free to email at [e-mail] and we will get in contact as soon as possible.